![]() ![]() Read Also > Why Does The 3-Way Switch Only Work When Another Is On? The neutrals will get tied together with a wire nut, and the same will happen with all the grounds. Then at the other fixture, the hot from the jumper and the hot from the fixture will be tied together with a wire nut. The wire coming from the switch will tie together with the fixture hot wire and the hot from the jumper wire. Wire the fan and light using the jumper wire that you installed. ![]() All the neutrals will be connected together, and the same with the ground wires. Take the hot wire from the fan, the hot wire from the light, and wire nut it together with the hot wire coming from the switch. Learn how to make a jumper wire with this helpful guide from. This will allow you to wire them together so they can be controlled off the same switch. Install a wire between the light fixture and the fan if they are individual units. The meter should read 0-volts.ĭo this for both switches if you are eliminating an existing switch. Touch one probe to the black wire on the switch and then touch the other to the ground wire. It is best to verify power is off using your voltage meter before touching any bare wires. Turn off power at the breaker so you don't get shocked. Read Also > What Are The Best Bathroom Fan & Light Combos? Step 3 - Turn Power Off Without touching any bare wire, verify what wire goes to your light or fan from the switch, and what wire is your main power wire. Verify the wiring in the bathroom fan so they don't get mixed up. I invite you to read our detailed guide on identifying wire colors here. This is especially important when it comes to wiring a fan and light to one switch. This will tell you how each fixture should be wired and what color your hot wires are. Read through the installation guide to become familiar with the bathroom fan before you begin the project.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |